How to Select Corrosion Inhibitors: A Practical Table for Nine Corrosive Environments
Review nine corrosion mechanisms—including CO₂, H₂S, chloride, oxygen, SRB, and acid corrosion—and map each environment to a suitable inhibitor system and multi-component selection strategy.
Article Summary
Different corrosion mechanisms require different molecular protection strategies. CO₂ corrosion is typically addressed with imidazoline-based film-forming inhibitors; H₂S service needs both corrosion control and hydrogen-entry suppression through quaternary ammonium salts combined with sulfur-containing synergists; chloride pitting calls for strongly adsorbing inhibitors and corrosion-resistant alloys; oxygen corrosion requires deoxygenation together with film formation; and microbiologically influenced corrosion needs biocide and inhibitor coordination.
In combined CO₂/H₂S/chloride service, imidazoline film formation, quaternary-ammonium adsorption, hydrogen control, amphoteric interfacial regulation, and microbial control should be evaluated together under simulated field conditions rather than extrapolated from single-factor laboratory tests.
This page presents an article summary. Read the original WeChat article for the full content.